Wacker Neuson BPS1030A - Maintenance Plan; Maintenance Work

Maintenance
9.2 Maintenance plan
9.2 Maintenance plan
NOTICE
Danger of engine damage!
► When commissioning new machines, an oil change must be carried
out once after 20 operating hours.
Maintenance work daily monthly 100h 125h 300h 500h
Clean the machine.
• Visual check for completeness.
• Visual check for damage.
●
Check engine oil fill level. ●
Check air filter intake area. ●
Check screw connections. ●
Check the fuel level ●
Clean and check air filter. ●
Check V-belt tension. ●
Cleaning the deposit cup. ●
Change engine oil. ●
Check spark plugs. ●
Clean fuel filter.* ●
Check rubber buffer .* ●
Check valve clearance.* ●
Replace fuel filter.* ●
* Have this work carried out by a service partner.
9.3 Maintenance work
Carrying out preparations:
1. Place the machine on a level surface.
2. Decommissioning the machine.
3. Let the machine cool down.
9.3.1 Cleaning the machine
Observe the following when cleaning the machine with a high-
pressure cleaner:
1. Do not aim high-pressure cleaner directly at air intake area and
electrical components.
2. Do not hold the high-pressure cleaner too close to the machine in
order to avoid damage to labels and sensitive components.
40 Operator’s Manual | BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A | BPS | 5100060577 | 01/2023 |
Version: 5 | [en]