Maintenance
Maintenance work 9.3
Visual check after cleaning:
1. Check cables, hoses and lines for leaks and chafe marks.
2. Check screw connections.
ð Replace damaged components.
3. Check all safety, warning and operating instructions for complete-
ness.
ð Replace missing or damaged labels and signs immediately.
9.3.2 Checking and topping up the fuel level
1. Remove dirt.
2. Open filler cap1.
3. Check the fuel level.
ð Max. fuel level to lower edge of filler neck.
4. Refuel if necessary, see Technical Data on page 51.
5. Close filler cap tightly.
[en] | Version: 5 | 01/2023 | 5100060577 | BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A | BPS | Operator’s
Manual 41
9
To Next Page
Loading...
