Wacker Neuson BPS1030A - Conversion Table 13.5

Technical Data
Conversion table 13.5
Engine manufacturer Honda
Material number engine 5100045995
Oil filling max. [l] 0,6
Output max. [kW] 3,6
RPM [1/min] 3600
Standard SAE J1349
Exhaust-emission level EU Stage V, US Phase 2
CO2 emission* [g/kWh] 757
Spark plug type NGK BP-6 ES
Electrode gap [mm] 0,7 - 0,8
* Determined value of the CO2 emission during engine certification without consideration of the applications on
the machine.
Engine manufacturer Honda
Material number engine 5100046324
Engine type GX 160
Combustion processes four-stroke
Cooling Air
Cylinder 1
Cubic capacity [cm3] 163
Inclined position max. [°] 20
Fuel type Gasoline
Fuel consumption [l/h] 0,8
Tank volume [l] 3,6
Oil specification SAE 10W-30
Oil filling max. [l] 0,6
Output max. [kW] 3,6
RPM [1/min] 3600
Standard SAE J1349
Exhaust-emission level EU Stage V, US Phase 2
CO2 emission* [g/kWh] 757
Spark plug type NGK BP-6 ES
Electrode gap [mm] 0,7 - 0,8
* Determined value of the CO2 emission during engine certification without consideration of the applications on
the machine.
13.5 Conversion table
The following conversion tables enable the conversion of the metric val-
ues from the instructions, in particular the technical data, into the imper-
ial.
Conversion table
Volume units
1cm³ 0.061 in³
1m³ 35.31ft³
1ml 0.034 US fl.oz.
[en] | Version: 5 | 01/2023 | 5100060577 | BPS1030A, BPS1135A, BPS1340A, BPS1550A, BPS2050A | BPS | Operator’s
Manual 57
13