Safety information
SV00069en.fm 11
2.5 Transport
2.5.1 For the loading and transportation of compacting machines with
hoisting gear, suitable sling chains must be secured at the relevant
fixing point.
2.5.2 Loading ramps must be able to bear the load and be in a stable
position. Make sure that no one can be endangered if the machine
slips away or tips over, or if parts suddenly move upward or downward.
2.5.3 When vibrating plates are being transported in vehicles, precautions
have to be taken to ensure that they do not slip or fall over.
2.6 Maintenance checks
2.6.1 According to the conditions and frequency of use, vibrating plates must
be checked for safe operation at least once a year by skilled
technicians, such as those employed by WACKER service stations,
and repaired if necessary.
Please observe the appropriate rules and regulations valid in your
country.
To Next Page
Loading...
Need help?
General
