EasyManua.ls Logo

Wacker Neuson BPU 2540

Wacker Neuson BPU 2540
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Maintenance
T01093en.fm 25
8.5 Checking / cleaning / replacing the spark plug
f Remove the spark plug connector.
f Remove the spark plug with a spark plug wrench .
f Clean the electrodes with a wire brush.
f Check the isolator (2) – if damaged, replace the spark plug.
f Check and adjust the electrode gap (1) – see chapter Technical data for the
gap.
f Insert the spark plug and tighten it with a torque wrench.
WARNING
Hot exhaust!
Touching it can cause burns.
Only remove the spark plug when the engine has cooled down.
Torque [Nm] Spark plug
15 New spark plug
25 Used spark plug
CAUTION
A loose spark plug can damage the engine.
Always tighten the spark plug.
1
2

Related product manuals