TD00450GB
8
TECHNICAL DATA
BPU 2950A
Item no. 0007962 ...
Forward / reverse speed m/min: to 22
Surface compaction performance m
2
/h: to 660
Operating weight (mass) kg: 152
Power transmission From drive engine directly to exciter unit via
centrifugal clutch and V-belt
Exciter
Vibrations rpm’s (Hz): 5400 (90)
Multigrade oil SAE 10 W 40
Drive motor Air-cooled single-cylinder 4-stroke diesel engine
Piston displacement cm
3
: 270
Engine speed (rpm) rpm’s: 3600
Nominal output kW (HP): 6,6 (9)
Oil SAE 10 W 40
Fuel gasoline
Fuel consumption l/h: 1,5
Tank capacity l: 6,0
Hydraulic control
Hydraulic oil Fuchs Renolin MR 520
The required sound specifications, called-for by the EC-Machine Regulations per Appendix 1, Paragraph
1.7.4.f, are
- sound pressure level at the operator's location L
pA
= 88 dB(A)
The sound values were determined according to ISO 3744 for the sound power level (L
wA
) and, alternately,
ISO 6081 for the sound pressure level (L
pA
) at the operator's location.
The weighted effective acceleration value, determined according to ISO 8662, Part 1, is 6,8 m/s
2
.
The sound and vibration measurements were carried out and obtained with the machine working on crushed
gravel at nominal engine speed.