BS 600/BS 700 Maintenance
wc_tx000024gb.fm 31
6.8 Troubleshooting
Problem / Symptom Reason / Remedy
Engine does not start, or stalls • No fuel in tank.
• Spark plug fouled.
• Fuel valve closed.
Engine does not accelerate, is
hard to start, or runs errati-
cally.
• Improper fuel mix. Too much oil.
• Spark plug fouled.
• Clean muffler and exhaust port.
• Crankshaft seals are leaking.
• Check air cleaner.
Engine overheats. • Improper fuel mix. Not enough oil.
• Clean cooling fins and fan blades.
Engine runs, rammer does not
tamp.
• Inspect clutch for damage. Replace if necessary.
• Broken connecting rod or crankgear.
• Low engine performance. Compression loss.
Plugged exhaust port.
Engine runs, rammer opera-
tion is erratic.
• Oil/grease on clutch.
• Broken/worn springs.
• Soil buildup on ramming shoe.
• Broken parts in ramming system or crankcase.
• Engine operating speed is too high.
To Next Page
Loading...
