Safety precautions
SV00068GB 28
NOTE:
For long, straight cuts we recommend using a guide cart (24, see also
“SPECIAL ACCESSORIES“). This makes it much easier to guide the
unit in a straight line with less effort.
4.10.3 When cutting slabs to size, you need not cut through the entire material
thickness (creating unnecessary dust). Instead, simply make a shallow
groove, and then knock off the excess material cleanly on a flat surface
(25).
ATTENTION!
When cutting into lengths, cutting through material, making cutouts,
etc., always make sure to plan the direction and sequence of cuts in
such a way that the blade does not get jammed by the cut-off piece,
and that no persons can be injured by falling pieces.
24
25
To Next Page
Loading...
