Wacker Neuson DT10 - Stopping the Diesel Engine

BA DT10 en - Edition 1.5 * dt10b330.fm 3-11
Operation
Stopping the diesel engine
☞Push throttle 5 fully backward
☞Check whether the control lever for releasing PTO shaft A is in position O
➥The PTO shaft is switched off
☞Turn starter B to position E
☞Turn fuel cock F anticlockwise to position S
➥The fuel cock is closed
Fig. 29: Throttle
5
Fig. 30: Hydraulic PTO shaft (HPTO)
A
O
Fig. 31: Electric starter
E
B
Fig. 32: Fuel cock
F
O
S