BA DT10 en - Edition 1.5 * dt10b330.fm 3-17
Operation
Skip
Do not operate the skip during machine travel and operation on slopes,
otherwise –
Accident hazard!
☞Do not actuate the skip when driving across slopes
☞Do not actuate the skip when driving up or down slopes
The loader unit also moves as the skip is tilted in and out.
Loader unit operation (option)
Always keep the loader unit 30 – 40 cm above the ground during machine opera-
tion.
Fig. 39: Skip operation
A
B
2
Position Function
•A 2 Push forward Skip is tilted out
•B 2 pulled backwards Skip is tilted in
Position Function
•A 1 Push forward Loader unit is lowered
•B 1 pulled backwards Loader unit is raised