BA DT10 en - Edition 1.5 * dt10b340.fm 3-27
Operation
☞Tilt in the loader unit fully E
☞Pull control lever 1 D backwards
Perform slow movements of the loader unit. This distributes the material evenly in
the skip.
Transporting with a full skip
Careful when driving in rough terrain with a full skip –
Accident hazard!
Pay particular attention to this when turning or performing machine travel on
slopes. To avoid accidents:
☞Fully tilt in the skip
☞Bear in mind the tilting limit during machine travel and operation on slopes
☞Fully tilt in the skip A
☞Lower the loader unit (option) to transport position B
☞Always reverse up a slope at low speed with a full skip
Fig. 53: Fully tilt in the loader unit
E
1
D
Fig. 54: Transporting with a full skip
B
A
To Next Page
Loading...
Need help?
General
