3-28 BA DT10 en - Edition 1.5 * * dt10b340.fm
Operation
Tilt out the skip
Tilting out the skip alongside a pit is dangerous –
Accident hazard!
☞Ensure sufficient stability
☞Do not drive too closely to the pit
• Secure the machine with chocks if necessary
☞Slowly tilt out the skip
☞Always watch the material as you tilt out the skip: ensure that the material is
dumped out evenly and does not remain stuck in the skip, otherwise the
machine could tip over
☞Tilt out the skip A
☞Slide the control lever 2 C forward
➥Raise the loader unit
As you tilt out the skip, ensure that the loader unit does not touch the ground or
the material transported in the skip, otherwise the loader unit can be damaged.
☞Raise the loader unit completely
Fig. 55: Tilt out the skip
A
C
2
To Next Page
Loading...
Need help?
General
