Factory-Installed Options Mobile Generators
wc_tx000380gb.fm 74
5 Factory-Installed Options
This machine may be equipped with one or more of the following factory-installed
options. To verify if any of these options are installed on your machine, contact the
WACKER Corporation at 1-800-770-0957. A nameplate listing the Model Number, Item
Number, Revision, and Serial Number is attached to each unit. Please have this
information available when contacting WACKER Corporation.
5.1 Block Heater
See Graphic: wc_gr001709
The engine block heater option includes a block heater (a) with a cord
(b). The function of the block heater is to heat the engine coolant/
engine block to improve cold-weather engine starting. Plug the cord
into a 120V power supply.
To Next Page
Loading...
Need help?
General
