8 Transport
100_0101_tr_0001.fm 25
8 Transport
Transporting the machine
1. Switch off the machine via the ON/OFF switch.
2. Wait until the machine has come to a complete standstill.
3. Pull the plug from the plug receptacle.
4. Place the machine on or into a suitable means of transport.
5. Roll up the power cable and the protective hose.
Note: Do not kink the protective hose and power cable.
6. Secure the machine against falling and sliding.
WARNING
Improper handling can result in injury or serious material damage.
Read and follow all safety information of this operator's manual, see chapter
Safety.
WARNING
Hot vibrator head.
Touching it can cause burns.
Only touch the vibrator head once the engine has cooled down.
Wear protective gloves.
To Next Page
Loading...
