10 Maintenance
32
100_0101_mt_0001.fm
10 Maintenance
10.1 Maintenance personnel qualifications
Qualifications for maintenance work
The maintenance tasks described in this operator's manual may be performed
by any responsible user unless otherwise stated.
Some maintenance tasks may only be performed by specially trained personnel
or by the service staff of your Wacker Neuson contact — these are specifically
noted.
10.2 Maintenance schedule
Note: The time intervals mentioned here are reference values for normal oper-
ation. For extreme operation, e.g. continuous use, the service intervals
should be halved.
WARNING
Improper handling can result in injury or serious material damage.
Read and follow all safety instructions of this operator's manual, see chapter
Safety.
WARNING
Improper handling may cause a danger to life by electrocution.
Only a qualified electrician is permitted to open the machine, perform re-
pairs, and perform a subsequent safety check in accordance with applicable
regulations.
Task Daily be-
fore oper-
ation
Every
100 hrs.
Visual inspection of all parts
for damage.
Check the wear dimensions.
Change oil in vibrator head *
* Have these tasks carried out by the service department
of your Wacker Neuson representative person.
To Next Page
Loading...
Need help?
General
