9 Use and operation
26
100_0101_op_0001.fm
9 Use and operation
9.1 Prior to starting the machine
After unpacking, the machine is ready for operation.
Checking the machine
Check the machine and all components for damages.
Damage to the protective hose and the power cable.
Checking the mains
Check if mains or power distribution on the construction site have the correct
operating voltage (see nameplate of the machine or chapter Technical Data).
Check if mains or power distribution on the constructions site are protected
in accordance with current standards and regulations.
9.2 Starting up
WARNING
Improper handling can result in injury or serious material damage.
Read and follow all safety information of this operator's manual, see chapter
Safety.
WARNING
Damaged insulation.
Danger of electrocution!
Do not kink or damage the protective hose and power cable.
To Next Page
Loading...
Need help?
General
