11 Malfunctions
36
100_0101_ts_0001.fm
Control lamp flashes red twice. Inverter has switched off due to
excess temperature.
1. Allow the inverter to cool
down.
2. Carry out a reset:
Switch the machine off and
on again.
Control lamp flashes red three
times (for a short period).
The Bodyguard
®
has turned off
the machine.
1. Pull out the plug.
2. Eliminate the fault or have it
eliminated. *
3. Insert the plug.
No Bodyguard
®
present. Have the machine reset to its
original condition. *
* Have these tasks carried out by the service department of your Wacker Neusoncontact person.
Malfunction Cause Remedy
To Next Page
Loading...
