Wacker Neuson M1500 User Manual

11 Maintenance
100_0101_mt_0009.fm 31
4. Remove the shaft core entirely from the protection hose.
5. Wipe down the shaft core with a clean, lint-free cloth.
6. Clean the thread of the coupling and the flexible shaft with a wire brush and cleaning agent.
Exchange the plastic bushing
1. Remove the retaining clip with a screwdriver.
2. Pull out the plastic bushing, if necessary with a removal tool.
3. Wipe down the bearing point with a clean, lint-free cloth.
4. Insert new plastic bushing.
5. Insert the retaining clip with a curvature inwards until all teeth lock into place in the groove.
Lubricate the shaft core
 Lightly grease the shaft core with your hands with an even thin layer of special lubricant (accessory).
NOTICE
Do not clean the shaft core or the protection hose with a solvent!
Item Designation Item Designation
1 Flexible shaft 3 Retaining clip
2 Plastic bushing
Item Designation Item Designation
1 Shaft core 2 Protection hose
NOTICE
You have to exchange the flexible shaft if it displays damage or wear tracks.

Wacker Neuson M1500 Specifications

General

Brand	Wacker Neuson
Model	M1500
Category	Engine
Language	English