To Next PageTo Next Page
Need help?Do you have a question about the WACO 2609C and is the answer not in the manual?
General| Brand | WACO |
|---|---|
| Model | 2609C |
| Category | Measuring Instruments |
| Language | English |
Checks for package contents of the Digital Clamp Meter upon receipt.
Essential safety measures for personal safety during operation and maintenance of the meter.
Instructions for cleaning the meter case and avoiding damage from dirt or moisture.
Details on IEC standards, CAT ratings, and pollution degree for safe usage of the instrument.
Explanation of symbols used on the instrument for clear understanding of warnings and functions.
Identification of main controls, buttons, and display elements on the clamp meter.
Location and function of input terminals for various measurement types.
Explanation of the digital display and its annunciators for readings and operational modes.
Details on the purpose and operation of buttons like HOLD, RANGE, ZERO, INRUSH, MAX/MIN, and Backlight.
Instructions on using the clamp jaws for current measurement and conductor identification.
Important preliminary checks and safety advice before performing any measurement.
Step-by-step guide for performing voltage measurements and associated safety warnings.
Procedures and safety warnings for measuring AC and DC current using the clamp meter.
Instructions for measuring electrical resistance, including precautions and test lead connections.
Guide to performing continuity tests, including audible indication and resistance thresholds.
Procedure for testing diodes, including forward voltage drop and indications for good/bad diodes.
Steps for measuring capacitance, including discharge, residual capacitance, and polarity.
Instructions on using the K-type thermocouple to measure temperature accurately.
Method for measuring signal frequency using the clamp meter and test leads.
Procedure for measuring the percentage of duty cycle in electronic signals.
Overview of display, indicators, operating environment, power, and physical dimensions.
Detailed ranges, accuracies, and overload protection for DC voltage measurements.
Specs for AC voltage measurements, including accuracy, frequency response, and overload protection.
Specifications for AC current measurement, including ranges, accuracies, and overload limits.
Details on DC current ranges, resolutions, accuracies, and overload protection.
Resistance measurement ranges, resolutions, accuracies, and open circuit voltages.
Parameters for continuity tests and diode measurements, including thresholds and test currents.
Specifications for capacitance measurement, including ranges, resolutions, and accuracies.
Temperature measurement ranges, resolutions, accuracies, and sensor types.
Parameters for %Duty Cycle and Frequency measurements, including ranges and accuracies.
Guidelines for cleaning the exterior of the instrument with a dry cloth.
Step-by-step instructions and safety warnings for replacing the 9-volt battery.
