3
SAFETY PRECAUTIONS
This manual contains information which must be read and understood before using the equipment. When you come to an
area which has one of the following symbols, pay particular attention and make certain to heed the safeguard.
WARNING
Important safety information indicates a hazard which may cause serious injury or loss of life.
CAUTION
Important information that tells how to prevent damage to equipment or how to avoid causes of minor injuries.
Notes: Gives important information which should be given special attention.
CAUTION
THIS UNIT IS PROVIDED WITH A THERMALLY PROTECTED AUTOMATIC RESET. IF AN OVERLOAD
OCCURS THE THERMALLY PROTECTED AUTOMATIC RESET DISCONNECTS THE MOTOR FROM THE
POWER SUPPLY.
• Motor will restart without warning when protector automatically resets.
• Always disconnect motor from power supply before working on equipment.
• When thermally protected automatic reset disconnects the motor from the power supply, relieve pressure by
turning priming valve to "prime" A .
• Turn ON-OFF switch OFF.
CAUTION: THE CAUSE OF THE OVERLOAD SHOULD BE CORRECTED BEFORE RESTARTING. (SEE
TROUBLE SHOOTING )
To Next Page
Loading...
Need help?
General
