WAGNER EPG S2 User Manual

38
PXM
P_02589
OPERATING AND ASSEMBLY MANUAL
VERSION 08/2015 ORDER NUMBER DOC2350372
6.8 COMMISSIONING
NOTICE
Positioning of powder tank and tank cover!
Danger of damage to the device.
Align the powder tank or powder box on the vibrator table so that the suction system
can move in and out unimpeded.
Only insert the cover into the guides and push it back to the limit stop after lowering
the suction tubes.
Remove cover before powering up the intake tubes.
The tank mounting and injector mounting plate must be horizontally aligned in all
directions.
The hose for the  uid air must either be connected to the terminal for the box- uidizing
device ( oor) or on the powder tank.

WAGNER EPG S2 Specifications

General

Brand	WAGNER
Model	EPG S2
Category	Industrial Equipment
Language	English