To Next PageTo Next Page
Need help?Do you have a question about the WAGNER FineCoat 8800 and is the answer not in the manual?
General| Max Pressure | 290 bar |
|---|---|
| Weight | 5.5 kg |
| Hose Length | 5 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power | 880 W |
| Type | Airless |
| Max. Material Pressure | 20 MPa |
| Motor Power | 880 W |
| Power Consumption | 880 W |
Explains the spraying technique, system functions, applications, and materials.
Presents technical specifications for the FineCoat models and a system diagram.
Guidelines on material preparation, purity, and viscosity/nozzle set recommendations.
Steps for connecting the unit, filling the container, and initial power-on.
Guides on selecting spray patterns and adjusting spray jet width for optimal application.
Instructions on adjusting material flow, air volume, and feed pipe orientation.
Proper holding, distance, and movement for even surface finish.
Procedure for securing the spray gun and switching off the unit during work interruptions.
Steps for powering down, emptying, and cleaning the spray gun and container.
Step-by-step guide on removing, cleaning, and replacing the spray nozzle set.
Details nozzle sets, hoses, and service kits for the spray gun.
Lists the components included in the service set and its part number.
Instructions for changing air filters indicated by the indicator lamp.
Guidance on replacing turbo-blower carbon brushes annually or every 500 hours.
Details RN 30 extension tip and WF 20 flocking gun with their part numbers.
Information on WSL spray lances and the FineCoat 9800 upgrade set.
Addresses problems with the unit not starting or no coating material flow.
Troubleshoots spray pattern defects, flutters, and leaks around the needle.
Lists part numbers and descriptions for the FineCoat spray gun.
Lists part numbers and descriptions for air hose components and provides a diagram.
Lists part numbers and descriptions for the turbo-blower unit.
Diagram showing the air filter and motor air filter components with item numbers.
Explains manufacturer's liability and states compliance with EC directives.
Details warranty terms, coverage, exclusions, and claim procedures.
