To Next PageTo Next Page
Need help?Do you have a question about the WAGNER Finish 270 and is the answer not in the manual?
General| Type | Airless Paint Sprayer |
|---|---|
| Max Pressure | 200 bar |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Power Source | Electric |
| Nozzle Size | 0.015 - 0.021 inches |
Highlights severe risk of injection injuries from high-pressure spray and necessary medical action.
Key safety rules to observe before starting the unit, including earthing and leak checks.
Addresses flash points, ignition sources, explosion protection, and ventilation needs.
Details risks of spray jet injuries, injection, recoil, and use of breathing equipment.
Covers electrostatic charging, site connections, electrical work, and grounding requirements.
Details the technical construction and operation of the spraying unit's hydraulic system.
Step-by-step guides for starting the unit with suction system or 5L hopper.
Instructions for connecting the high-pressure hose, spray gun, and power supply.
Procedure for initial cleaning, hydraulic ventilation, and first use with coating material.
Tips for achieving even spray patterns, proper gun movement, and distance control.
Safe handling, care, bending radius, and specifications for the high-pressure hose.
Steps to safely stop the unit, secure equipment, and clean components during breaks.
Detailed steps for cleaning via suction system or hopper configurations.
Guide for diagnosing and resolving common unit problems like no start or low pressure.
