WAGNER Finish 270 User Manual

32
Finish 270 / 250
GB
contents
Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 33
1.1 Flash point _________________________________ 33
1.2 Explosion protection _________________________ 33
1.3 Danger of explosion and re from sources of
ignition during spraying work _________________ 33
1.4 Danger of injury from the spray jet _____________ 33
1.5 Secure spray gun against unintended operation __ 33
1.6 Recoil of spray gun __________________________ 33
1.7 Breathing equipment as protection against
solvent vapors ______________________________ 33
1.8 Prevention of occupational illnesses ____________ 34
1.9 Max. operating pressure ______________________ 34
1.10 High-pressure hose (safety instructions) _________ 34
1.11 Electrostatic charging
(formation of sparks or ames) ________________ 34
1.12 Use of units on building sites and workshops _____ 34
1.13 Ventilation when spraying in rooms ____________ 34
1.14 Suction installations _________________________ 34
1.15 Earthing of the object ________________________ 34
1.16 Cleaning the unit with solvents ________________ 34
1.17 Cleaning the unit ___________________________ 34
1.18 Work or repairs at the electrical equipment ______ 34
1.19 Work at electrical components _________________ 34
1.20 Setup on an uneven surface ___________________ 35
2 GENERAL VIEW OF APPLICATION ____________ 35
2.1 Application ________________________________ 35
2.2 Coating material ____________________________ 35
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 35
2.2.2 Filtering ___________________________________ 35
3. DESCRIPTION OF UNIT _____________________ 36
3.1 Airless process ______________________________ 36
3.2 Functioning of the unit _______________________ 36
3.3 Explanatory diagram _________________________ 37
3.4 Transportation ______________________________ 37
3.5 Trolley backtting (only Finish 270) _____________ 37
3.6 Technical data Finish 250 _____________________ 38
3.7 Technical data Finish 270 _____________________ 38
4 STARTUP _________________________________ 39
4.1 Unit with suction system _____________________ 39
4.2 unit with upper hopper (5 litres) _______________ 39
4.3 high pressure hose and spray gun ______________ 39
4.4 Connection to the mains network ______________ 39
4.5 Cleaning preserving agent when starting-up of
operation initially ___________________________ 40
4.6 Ventilate unit (hydraulic system) if the sound of
inlet valve is not audible ______________________ 40
4.7 Taking the unit into operation with
coating material ____________________________ 40
5 SPRAYING TECHNOLOGY ___________________ 41
6 HANDLING THE HIGHPRESSURE HOSE _______ 41
6.1 High-pressure hose __________________________ 41
7 INTERRUPTION OF WORK ___________________ 41
8 CLEANING THE UNIT _______________________ 42
8.1 Cleaning the unit from the outside _____________ 43
8.2 Suction lter _______________________________ 43
8.3 High-pressure lter __________________________ 43
8.4 Cleaning the Airless spray gun _________________ 44
9 SERVICING ________________________________ 44
9.1 General servicing ___________________________ 44
9.2 High-pressure hose __________________________ 44
10 REPAIRS AT THE UNIT ______________________ 45
10.1 Inlet valve Pusher ___________________________ 45
10.2 Inlet valve _________________________________ 45
10.3 Outlet valve ________________________________ 45
10.4 Pressure control valve ________________________ 46
10.5 Relief valve ________________________________ 46
10.6 Replacing the diaphragm _____________________ 46
10.7 Replacing the power cable ___________________ 47
10.8 Typical wear parts ___________________________ 47
10.9 Connection diagram _________________________ 48
10.10 Remedy in case of faults ______________________ 49
11 SPARE PARTS AND ACCESSORIES ____________ 50
11.1 Finish 270 / 250 accessories ___________________ 50
11.2 Spare parts list Pump head ___________________ 51
11.3 Spare parts list Pump-Aggregate ______________ 52
11.4 Spare parts list high-pressure lter _____________ 53
11.5 Spare parts List Trolley _______________________ 54
11.6 Spare parts list suction system (rigid) ___________ 55
11.7 Spare parts list hopper 5l _____________________ 56
11.8 Spare parts list hopper with TopClean ___________ 56
Testing of the unit ________________________________ 57
Important information on product liability_____________ 57
Note on disposal __________________________________ 57
Guarantee declaration _____________________________ 57
CE - declaration__________________________________ 118
European service network _________________________ 120

WAGNER Finish 270 Specifications

General

Brand	WAGNER
Model	Finish 270
Category	Paint Sprayer
Language	English