WAGNER Force Ten FDX - FDX; FPX Features Overview; Construction and Materials; Operation and Control Functions; Power Source and Battery Life

3
FORCE TEN
TM
FORCE GAGE
CONSTRUCTION
• Fiberglass reinforced plastic pistol grip handle.
• Large 4-digit 0.7” display.
• Displays: TENS, COMP, Peak, 5-bar battery status,
USB/SGL or USB/CNT data transmission and units.
• Tension and Compression with lbf, kgf, N and ozf selectable units.
• American standard threads – Metric adapters available.
OPERATION
• Simple 4-button control and menu access.
• Selectable units: lbf, kgf, N and ozf.
• Selectable auto-off, backlight & audible signal.
• Peak force sampling: 1200 / second.
• USB data output and charging.
• Single value output with SEND key.
• Single or continuous data output with Windows-compatible
data logging software, included with gage.
POWER
• 2 x AAA 1.2V 1000 mAh rechargeable NiMH batteries.
• Charge battery from AC or USB.
• Selectable auto-off conserves battery charge.
ACCESSORIES
• 2 x AAA NiMH batteries, AC adapter/charger,
hook, flat tip, carrying case, 6-ft long USB cable & driver,
Mark-10 MESUR™Lite data logging software,
NIST calibration certificate.
• FDX implements - hook, flat tip
• FPX implements - 1 cm
2
rubber tip, verification hook
ACCURACY
• ± 0.3% of full scale ±1 least significant digit.
WEIGHT & DIMENSIONS
• 0.5 lb (225 g), shipping weight: 4 lb (2 kg).
• 5
3
/
8
” (136 mm) H x 2
3
/
4
” (70 mm) W x 1
1
/
4
” (32 mm) D.
FDX / FPX
FEATURES