WAGNER Force Ten FDX - FDX; FPX Specifications (Part 2); Technical Specifications Overview; Calibration and Menu Settings

8
FORCE TEN
TM
FORCE GAGE
TABLE 3 FORCE TEN™ - TECHNICAL SPECIFICATIONS
Item
Specification
Accuracy
±0.3 % Full Scale (FS) ± 1 Least Significant Digit (LSD)
Display
4-digit, 0.7” Liquid Crystal Display (LCD)
Display Update
8 per second
Resolution
1000 graduations (1250 for 25 lbf capacity)
Tare
20% of Full Scale (FS)
Overload Protection
15 / 37.5 / 75 / 130 lbf
Power
• 110 or 220 VAC Adapter/Charger
• USB connection
• Rechargeable AAA NIMH battery
Battery Endurance
Up to 20 hours with backlight on
Up to 30 hours with backlight off
Battery Charge
Overnight for full charge
Calibration
Auto-Calibration – One full capacity weight
Peak Force Sampling Rate
1200 Samples per second
Menu Selection
Menu selection of:
• Unit – set lbf, kgf, N, ozf
• AoFF – set power off time
• PSS – display sample rate
• bLit – set backlight off time
• tonE – set audible button press tone
• USB – Display baud rate, stop bit, parity
• LCAL – start auto-calibration
FDX / FPX
SPECIFICATIONS