41
1
B_03919
5
3
4
2
6
7
OPERATING MANUAL
VERSION 01/2013 ORDER NUMBER DOC 2333538
7.2.1 SPRAYING
7.2 WORK
7.2.2 PRESSURE RELIEF / WORK INTERRUPTION
open
closed
If the system has been used with 2-component materials:
1. Secure gun and place nozzle in the gun.
2. Slowly open the ball valve (2).
3. Set required working pressure on the
pressure regulator (1).
4. Optimize the spraying results as laid down in
the gun instructions.
5. Start work process.
1. Close gun.
2. Close ball valve (2).
3. Release the system by opening the gun.
4. Close and secure gun.
5 Open and close the return line ball valve (3) to completely
depressurize the system.
Hardened material in the spraying system when 2-component material is processed!
Destruction of pump and injection system.
Follow the manufacturer‘s processing rules, particularly regarding the pot life.
Rinse thoroughly before the end of the pot life.
The pot life is decreased by warmth.
NOTICE
To Next Page
Loading...
Need help?
General
