WAGNER W 975 FLEXIO

50
W 950 Flexio/ W 975 Flexio
Varnish paints and glazes
50
W 950 Flexio/ W 975 Flexio
EN
i
The following chapters 20-26 describe working with vinyls and lacquers with
the spray attachment.
Read chapters 9-19 if you want to use wall paint with the W 950 / W975.
20. Starting work with the spray attachment
•
Put the machine down only on a level,
clean surface.
•
Before connecting to the mains supply, be
sure that the supply voltage is identical
with the value given on the rating plate.
•
Plug in the power cable.
•
Aligning suction tube. (Fig. 16)
If the suction tube is positioned correctly,
the container contents can be sprayed
without almost any residue.
When working on lying objects: Turn
the suction tube forwards. (Fig. 16 A)
Spraying work when working on overhead
objects: Turn the suction tube rearwards.
(Fig. 16 B)
•
Set the container on a sheet of paper, pour
in the prepared coating material.
•
Screw the container tightly onto the spray
gun
•
Connect gun handle and spray attachment
together. (g 17).
•
If already attached, remove the air hose from
the grab handle of the spray lance.
i
Only the air hose is required for
operating a spray attachment
with the W 950 / W975. To
facilitate handling, the material
hose can therefore be removed
from the air hose and the
suction hose can be detached
from the basic unit.
click

A

B
A