15
English
Title
1
. Make sure the sprayer is unplugged.
2. Remove the suction set from the material container and
submerge into a container of the solvent appropriate to
the type of material you sprayed.
Move on to
Cleaning the Components
, page 16.
3. Plug in the sprayer, and squeeze the trigger and spray
into a second container until the solvent coming through
the sprayer is free of material. Unplug the sprayer.
4. Unplug the sprayer. Press the Lock-N-Go™ buttons on
both sides of the sprayer with one hand, grab the cup or
pump with your other hand, and slide the spray cartridge
out.
5. Remove the suction set from the cleaning solution.
Unlock dual hose fitting (with hoses still attached) from
pump assembly ring.
6. Remove the suction set and dual hose fitting from the
suction hoses.
Cleanup for oil-based materials (suction extension)
To Next Page
Loading...
Need help?
General
