Walchem WebMaster - Introduction and Communication Methods

P/N 180273 Rev. N April 2017
5
Introduction
This Quick Start Guide is designed to help you establish basic
communications with your WebMaster/WebAlert.
There are four methods of communicating with your device.
Each connection is simple and requires no proprietary
software on your computer.
The five methods of communication with the WebMaster/WebAlert are as
follows:
1 USB (standard)
For local monitoring and reconfiguration
of your device via Laptop or dedicated
on-site desktop. (Windows XP,
Vista,Windows 7, Windows 8 or Mac
OSX)
2 ShoulderTap Internet
Communications
For monitoring and reconfiguration of
your device remotely via the Internet.
(Requires modem card option)
3 DirectTap Modem-to-Modem
For monitoring and reconfiguration of
your device remotely using traditional
modem-to-modem communications.
(Requires modem card option)
4 Ethernet
For monitoring and reconfiguration of
your device via Local Area Network
5 Cellular
For monitoring and reconfiguration of
your WebMasterONE remotely via the
Internet (requires cell modem and Vtouch
option).