Step 8
P.8
Step 9
C
Ø4*25mm
12
screw (C) and Philips head screwdriver.
Secure foot 7 to base 4 using
C
C
7
74
C
C
C
C
C
C
C
C
C
C
C
7
Align the opening in cam lock to the cam bolt and press into opening.
Using a screwdriver, rotate the cam lock until it engages with the cam
bolt and locks in place (anywhere between 90-180 degrees). Do not
over-tighten the cam lock. Doing so may result in damaged or broken
parts.
K
06
Secure part 1 to body
with Cam lock (K)
using Phillips head screwdriver.
K
K
K
K
K
K
K
K
K
K
K
To Next Page
Loading...
