Page
contents...
what is ultrasonic cleaning? 2
before you operate your ultrasonic cleaner & installation 3,4
the mode menu 5
first time use and setting the clock 6
the degas cycle 7
adjusting the power setting 8
loading the basket and cleaning instruments 9
restore factory defaults 10
operating a complete validated cycle 11,12,13
setting up a printer and printing validation reports 14,15
installing the USB driver and PC software 16
transferring information to a PC 17
using a USB memory stick 18
the temperature limit and changing the security code 19,20
the validation report printout explained 21,22
screen and error messages 23,24
basic do’s and don’ts 25,26
cleaning fluids 27,28
maintenance 29
accessories 30
specification 31
guarantee 32
user names and numbers 33
testing the ultrasonic in line with HTM 0105 34
HTM0105 certificate of validation 35,36
To Next Page
Loading...