Page
the degas cycle...
Degassing is the process of releasing air that is trapped within fluid in the
tank. Tap water has a small quantity of dissolved air in it, often because it is
passed through fine metal gauze in order to introduce air for aesthetic and
controllability purposes. This dissolved air has a ‘cushioning’ effect on the
ultrasonic waves, which reduces the effectiveness of the ultrasonic cleaner.
The unit will automatically perform a degas cycle after it has been
disconnected from the mains and then re-connected. The factory set
degas cycle is 90 seconds. This can be increased (to a maximum of 300
seconds) or reduced (to a minimum of 0 seconds) should your application
require, however it is suggested that the 90 seconds be the optimum
time for the cycle.
adjusting the degas time...
From the home screen press and release the key until the de-gas screen
is displayed:
Adjust the time by pressing the or keys until the required time is
displayed.
The time may be quickly adjusted to 300 seconds by holding the keys
and pressing and releasing the key. Similarly, the time can be quickly
adjusted to 0 seconds by holding the key and pressing and releasing the
key.
When the required time is displayed, press and release the key to save
the setting and return to the home screen. Press the key to move to the
next section.
To Next Page
Loading...