EasyManua.ls Logo

Walker Electronics Q105 - Ultrasonic Cleaner Specifications

Default Icon
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page
31
ultrasonic cleaner specifications…
The Q105 is manufactured by Walker Electronics Ltd in Collingham,
Newark, Nottinghamshire, UK. The case is constructed using stainless steel
complying with BS1449, the aluminium chassis complies with BS1470 and
the stainless-steel tank with BS304. All units comply with the requirements
of BSEN61010-1.
Model type : Q105
Serial number : See page 35
Rated voltage : 220-240 Volts AC, 50-60 Hz
Tank dimensions (mm)* : 240 long x 130 wide x 100 deep
External dimensions (mm)* : 265 long x 220 wide x 200 high
Working capacity : 2.0 litres
Maximum capacity : 2.5 litres
Weight : 3.10kg
Typical generator : 375 watts
peak output**
Typical power : 200 watts
consumption**
Operating frequency** : 50 kHz +/- 2 kHz
* Dimensions and weight are approximate. Internal dimension is taken at the top of the tank.
Dimensions at the base are smaller. External dimensions include the feet, lid and protruding
sockets
** Dependent on tank loading, fluids used and mains voltage. Refer to the in-built monitor for
accurate instantaneous power consumption and frequency. The typical power consumption
and typical generator peak output is based on the power being set to 100%.