Walker MS - Ghs System; Seat; Frame;Body Construction

Specications
6
MODEL MS
GHS SYSTEM
Blower 10 in. Diameter, Three-Blade Paddle Wheel
Blower Brake
Belt Scrubber Brake [Works in Combination with PTO Clutch, Stops
Blower within Five (5) Seconds of PTO Disengagement]
Max. Blower RPM 4000
Grass Catcher Capacity
gal / bu / L 63 / 6.7 / 238
Full Signal
Oscillating Vane Switch Mounted on Grass Delivery Spout Triggers
Horn Signal
Powerl
®
Oscillating Delivery Spout Driven by 12 Volt Electric Gearmotor
Spreads Material throughout Interior of Catcher @ 25 Cycles/
Minute
SEAT
Contour-Molded, with Nylon Backed Vinyl Cover and Integral
Foam Cushion
FRAME/BODY CONSTRUCTION
Frame All Welded Unitized Steel Chassis
Body 14 Gauge Steel
Deck 11 Gauge Steel
GHS Catcher and Chutes Molded Cross-Linked Polyethylene (UV Stabilized)
NOTE: The manufacturer reserves the right to make changes in specications shown herein at any time
without notice or obligation. The specications listed are for a standard conguration tractor, and may
change with the addition of optional equipment.