Walker MS - Blade Drive; Tire Size; Tire Pressure; DIMENSIONS (Tractor and Mower)

Specications
4
MODEL MS
TRANSMISSION (continued)
Transmission Fluid
Factory Service Mobil 1 Synthetic Motor Oil (15W-50)
Transmission Oil Capacity oz. (L) 19 (.56)
Transmission Cooling Cooling Fan Mounted on Drive Pulley
Ground Travel Speed
Forward MPH (km/h)
Reverse MPH (km/h)
0-5 (0-8) Innitely Variable
0-5 (0-8) Innitely Variable
BLADE DRIVE
PTO Shaft Sliding Spline Shaft with Two (2) High-Speed U-Joints
Blade Spindle
Each Blade (2) Mounts Direct on Peerless Right Angle
Gearbox with Tee Gearbox in Center Connected to PTO Shaft
(Complete Geared Drive, Peerless Model 1000 Gearboxes)
Blade Drive Clutch and Brake
Manual Belt Tightener Clutch and Scrubber Brake
[Stops Blades within Five (5) Seconds of Disengagement]
Max. Blade Speed
[22 in. (56 cm) Blade] @ 3600
RPM Engine
2900 RPM
[16700 FPM (5090 m/min)]
TIRE SIZE
Deck Caster Wheel 8 x 3.00-4 Pneumatic (4-Ply)
Drive 18 x 6.50-8 (4-Ply)
Drive (Optional Wide Tire) 18 x 8.50-8 (4-Ply)
Rear 13 x 6.50-6 (4-Ply)
TIRE PRESSURE PSI (KPA)
Deck Caster Wheel 20 (137)
Drive 15 (103)
Rear 20 (137)
DIMENSIONS (Tractor and Mower)
Length in. (cm)
Tractor Only 64.5 (164)
Tractor Wheel Base 42.25 (107)
With 36 in. (91 cm) 87 (221)
With 42 in. (107 cm) 89 (226)