Why does the cylinder stop on contact with wood on my Wallenstein WP845?
If the cylinder on your Wallenstein Log Splitter stops on contact with wood, it indicates that the second stage on the pump is not functioning. Pump may need service or be replaced, so it is recommended to call a technician.
Why doesn't the rope retract on my Wallenstein WP845 Log Splitter?
If the winch rope on your Wallenstein Log Splitter does not retract, it's likely because the winch gears are disengaged. Engage the winch gears to allow the rope to retract.
Why doesn't the rope pull out on my Wallenstein Log Splitter?
If the winch rope on your Wallenstein Log Splitter does not pull out, it's likely because the winch gears are engaged. Disengage the winch gears to allow the rope to pull out.
What to do if the control handle on my Wallenstein Log Splitter goes to neutral before rod is fully retracted?
If the control handle on your Wallenstein Log Splitter goes to neutral before the rod is fully retracted, it's likely that the detent is set too loose. Adjustment is required with detent on valve, so it is recommended to call a technician.
Why is my Wallenstein WP845 cylinder leaking?
If the cylinder on your Wallenstein Log Splitter is leaking, it's likely due to worn seals. Seal replacement may be required, so it is recommended to call a technician.
How to fix a Wallenstein WP845 winch motor that does not move?
If the winch motor on your Wallenstein Log Splitter doesn't move, it might be because the rope is jammed. To fix this, disengage the winch gears, pull the rope out, and guide it onto the spool when retracting.
Why does the wedge jump on my Wallenstein WP845 Log Splitter?
If the wedge on your Wallenstein Log Splitter is jumping, it could be due to the wedge frame jamming. Lubricate the wedge frame wear plates to resolve this issue.
What to do if cylinder rod moves slowly on my Wallenstein Log Splitter?
If the cylinder rod on your Wallenstein Log Splitter is moving slowly or not at all, it might be due to wood jammed around the wedge. To resolve this, shut off the machine and safely remove the wood.
Why is the hydraulic hose leaking on my Wallenstein WP845 Log Splitter?
If you find the hydraulic hose on your Wallenstein Log Splitter is leaking, it's likely that the hose is worn or damaged and needs to be replaced.
What to do if the control handle on my Wallenstein WP845 Log Splitter doesn't go to neutral after the rod is fully retracted?
If the control handle on your Wallenstein Log Splitter doesn't return to neutral after the rod is fully retracted, it could be due to several reasons. The detent might be set too tight, requiring adjustment by a technician. Alternatively, the hydraulic fluid may be too cold; allow the machine to warm up. The hydraulic fluid might also be too old or contaminated, in which case you should change the hydraulic fluid and filter.
Emphasizes the importance of safety and operator responsibility for preventing accidents.
Provides essential safety rules for operating, servicing, and maintaining the machine.
Offers guidelines for safe operation, modification, and maintenance of equipment.
Defines and lists steps to put the machine in a safe condition before service.
Details the four zones of a safe work area and guidelines for safe operation.
Explains the meaning and precautions associated with specific safety signs (1-6).
Identifies and labels the main components of the WP845 firewood processor.
Outlines essential safety precautions and PPE requirements for operating the machine.
Provides a comprehensive checklist to ensure the machine is ready before starting.
Covers safe and proper operation of the machine's engine.
Covers safety aspects related to engine operation, including carbon monoxide and general hazards.
Covers safe and proper operation of the machine's hydraulic system.
Highlights safety precautions for the hydraulic system, including leaks and pressure.
Details how to check the hydraulic fluid level and quality.
Provides step-by-step instructions for starting the machine's engine.
Outlines the steps for performing an emergency stop of the machine.
Describes the procedure for efficiently processing logs into firewood.
Guides the user through setting up the machine at the work site.
Covers the process of winching logs into the machine for processing.
Details critical safety precautions for operating the winch, covering rope angles and handling.
Provides step-by-step instructions for winching a log onto the machine.
Details the procedure for winching and positioning the first log for processing.
Outlines safety precautions and guidelines for using a chain saw with the machine.
Outlines safety rules and checks required before transporting the machine.
Covers critical safety rules and precautions before performing any service or maintenance.
Provides a schedule for performing maintenance tasks based on hours or time intervals.
General| Brand | Wallenstein |
|---|---|
| Model | WP845 |
| Category | Log Splitter |
| Language | English |
To Next Page
