Walter SURFOX 305 - Accessory Details; Clamp Rings and Electrolyte Solutions; Mounting a Cleaning Pad

16
10
Accessories
Accessories
C) PTFE clamp rings
PTFE clamp rings are designed to hold the cleaning pads
on the tungsten inserts.
They are available in two sizes:
Narrow clamp ring for
narrow pads No: 54-B 020
Use with narrow inserts.
10 per package.
Clamp ring for standard
cleaning pads No: 54-B 002
Use with standard inserts.
10 per package.
D) SURFOX electrolyte solutions
Surfox electrolyte solutions are specially formulated
phos-phoric acid cleaning solutions designed to be used
only in WALTER SURFOX electro cleaning systems.
SURFOX-G
pH NEUTRAL Electrolyte
Cleaning Solution
Cleans up to 3-5 feet per minute.
1.5 L / 50.7 oz. 54-A 065
STD Pack: 1 STD Carton: 4
5 L / 1.3 gal. 54-A 066
STD Pack: 1 STD Carton: 1
20 L/5.2 gal. 54-A 067
STD Pack: 1 STD Carton: 1
208 L / 55 gal. 54-A 068
STD Pack: 1 STD Carton: 1
SURFOX-T
Heavy-Duty Electrolyte
Cleaning Solution
Cleans up to 3-5 feet per minute.
1.5 L / 50.7 oz. 54-A 005
STD Pack: 1 STD Carton: 4
5 L / 1.3 gal. 54-A 006
STD Pack: 1 STD Carton: 1
20 L/5.2 gal. 54-A 007
STD Pack: 1 STD Carton: 1
208 L / 55 gal. 54-A 008
STD Pack: 1 STD Carton: 1
E) Mounting a cleaning pad
1. Squeeze and insert clamp ring.
2. Insert cleaning pad.
3. Firmly press in tungsten tip.
4. Remove tip with installed pad and clamp ring.