Kit for use with the 4iE
Step 2 - Install the Boiler Receiver (Electrician Required)
The Boiler Receiver should be installed in the boilers vicinity. Large metal objects such as the
boiler, hot water cylinder or radiators, should be at least 300mm away from the Boiler Receiver
and not directly between it and the 4iE.
Loosen both screws at
the bottom of the Boiler
Receiver and remove
the backplate.
Fix the backplate to the
wall using xing screws
provided.
Make sure to avoid cables or pipes
which may be buried in the wall
!
8
+
1 2
To Next Page
Loading...
