Warmup + Kit - Connecting to Wi-Fi and Verifying Connection

Kit for use with the 4iE
Step 4 - Pairing the 4iE & Boiler Receiver
16
+
To check that the system
has been installed
successfully, increase the
air temperature by
setting a temporary
override.
Once the 4iE has
powered up, connect to
your WiFi Network.
The heating indicator
will appear on the 4iE,
the light on the Boiler
Receiver will turn solid
GREEN and your heat
system should now
activate.
overrideWi-Fi
target
Warmup
until
backback acceptaccept
21.0°C 15min
4 5 6