Warmup + Kit - Stand Mount Assembly

Kit for use with the 4iE
Step 3 - Mounting
1
2
Remove the 4iE from its
packaging. Loosen both
closing screws located
at the bottom of the
4iE. Separate the front
housing from the back
plate.
Thread the power cable
through the Stand and
connect to the Power
Base from your +Kit.
Clip the Power Base
onto the Stand. Connect
the plug to a wall socket.
For optimal performance the thermostat should be located in an area with good ventilation. It
should not be beside a drafty window/door, in direct sunlight or above another heat generating
device (e.g. radiator or TV).
12
For Stand Mount
+