44
If the machine runs slowly on wash speed or
there is a slapping or thumping noise.
A Replace the V-belts
If a metallic noise can be heard at rear of
machine
A Tighten the pulley on the motor shaft
If the door is leaking
A Check the door gasket. If the gasket is in good
condition, install a 4-7 mm rubber hose seal
around the entire gasket, using the slits
provided.
Trouble shooting
61
1207
1175
1176
62
63
A
Fig.
62
Fig.
63
Fig.
61
To Next Page
Loading...
