26
26. Level control
4
Service
Manual
1417
2
21
24
22
11
12
14
Low levelHigh level
Water level check
Start the machine and select a standard
program. Check low water level for prewash and
main wash according to the illustration. Advance
the program using the START button and
check high water level for rinsing.
Water level is too high
•Check that the hose connecting the level
switch and the drain valve is not obstructed.
When necessary and when the machine is
empty of water, clean the hose by
disconnecting it from the level switch and
blowing air through it.
•Check the hose for holes which can be
caused by the hose rubbing against the
pulley.
•Overfilling can also be caused by burnt
contacts in the level switch. If this is the case,
replace the level switch.
Fig.
2
To Next Page
Loading...
