Wasp WWS650 How-To Guide

Portal > Knowledgebase > Hardware > WWS650 & WWS750 scanner: how to link (pair) to
base
WWS650 & WWS750 scanner: how to link (pair) to base
Scott Kircher - 2020-08-07 - in Hardware
If needed, user manuals can be downloaded from the article linked below in Related Pages.
To link (pair) the scanner to the base, use only the following instructions, which are from
Page 10 of the scanner's QRG (Quick Reference Guide):

Wasp WWS650 Specifications

General

Scanning Technology	Laser
Resolution	4 mil
Interface	USB
Bluetooth Range	Up to 10 meters
Supported Barcodes	UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 60°C
Humidity	5% to 95% (non-condensing)
Drop Specification	1.5 meters
Power Supply	Rechargeable Li-ion battery
Compatibility	Windows, Android, iOS
Light Source	650 nm Laser Diode