Need help?Do you have a question about the Wasp CCD Scanner and is the answer not in the manual?
General| Scanning Technology | CCD |
|---|---|
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Light Source | LED |
| Interfaces Supported | USB |
| Supported Barcodes | Code 39, Code 128, Interleaved 2 of 5, Codabar |
| Operating Humidity | 5% to 95% (non-condensing) |
| Humidity | 5% to 95% (non-condensing) |
Step-by-step guide for installing the WCS3900 USB scanner by connecting it to a PC's USB port.
Steps for installing the WCS3900 PS2 scanner, involving PC power down and cable connections.
Illustrates the PS/2 connection method for the WCS3900 scanner to a PC.
Illustrates the USB connection method for the WCS3900 scanner to a PC.
Instructions on how to adjust the minimum and maximum length settings for barcode scanning.
Instructions to reset the scanner to its default factory settings using a specific barcode.
Explains how to enable continuous scanning mode for hands-free operation.
Details on programming the scanner for PC (USB/PS/2) or Notebook host computer types.
Options for configuring the scanner's beep volume levels: Off, Low, Medium, High, and combinations.
Configuration options for interblock delay, affecting the time between scans for data integrity.
Configuration options for intercharacter delay, affecting the time between character transmissions.
Scanner automatically tracks Caps Lock status for PC XT/AT systems.
Configures the scanner to output lower case characters when Caps Lock is off.
Configures the scanner to output upper case characters when Caps Lock is on.
Sets the keyboard language to US, controlling key code output.
Sets the keyboard language to German, controlling key code output.
Sets the keyboard language to French, controlling key code output.
Sets the keyboard language to Spanish, controlling key code output.
Sets the keyboard language to Italian, controlling key code output.
Scans this barcode to clear any previously set preamble or postamble characters.
Allows configuration of prefix characters to be added before barcode data.
Allows configuration of suffix characters to be added after barcode data.
Configures end-of-text messages (terminators) to mark the end of barcode values.
Enables sending a specific identifier code when a particular barcode symbology is scanned.
Scans this barcode to enable all supported barcode symbologies simultaneously.
Scans this barcode to disable all supported barcode symbologies simultaneously.
Options to enable or disable the MSI Plessey barcode symbology.
Options to enable or disable the Interleaved 2 of 5 barcode symbology.
Options to enable or disable the Code 128 barcode symbology.
Options to enable or disable the Codabar barcode symbology.
Options to enable or disable the Code 39 barcode symbology.
Options to enable or disable the UPC-A barcode symbology.
Options to enable or disable the UPC-E barcode symbology.
Options to enable or disable the EAN-8 barcode symbology.
Options to enable or disable the EAN-13 barcode symbology.
Options to enable or disable the Code 93 barcode symbology.
Scans this barcode to enable or disable the Code 39 barcode symbology.
Enables or disables the Code 39 symbology with full ASCII character set support.
Configures Code 39 check digit calculation and transmission behavior.
Sets the minimum and maximum length for Code 39 symbology data.
Options for enabling/disabling, check digit, and length for Interleaved 2 of 5.
Options for enabling/disabling and length for Code 93 symbology.
Options for enabling/disabling and length for Code 128 symbology.
Options for enabling/disabling, Code ID, and group separator for UCC/EAN 128.
Configures the scanner to send or not send the Function 1 character.
Scans this barcode to enable or disable the MSI Plessey barcode symbology.
Configures MSI Plessey check digit verification and calculation methods.
Sets the minimum and maximum length for MSI Plessey symbology data.
Scans this barcode to enable or disable the Codabar barcode symbology.
Configures Codabar to send or not send the start and stop characters.
Configures Codabar check digit verification and transmission behavior.
Sets the minimum and maximum length for Codabar symbology data.
Scans this barcode to enable or disable the UPC-A barcode symbology.
Configures UPC-A transmission of leading and check digits.
Enables or disables 2-digit and 5-digit supplements for UPC and EAN/JAN.
Configures the scanner to convert UPC-A barcodes to EAN-13 format.
Scans this barcode to enable or disable the UPC-E barcode symbology.
Configures UPC-E transmission of leading and check digits.
Enables or disables the expansion of UPC-E barcodes to their UPC-A equivalents.
Enables or disables the 5-digit supplement for UPC-E barcode symbologies.
Enables or disables the 2-digit supplement for UPC-E barcode symbologies.
Controls whether supplements are transmitted if present or must be present.
Scans this barcode to enable or disable the EAN-8 barcode symbology.
Configures EAN-8 transmission of leading and check digits.
Enables or disables the 5-digit supplement for EAN-8 barcode symbologies.
Enables or disables the 2-digit supplement for EAN-8 barcode symbologies.
Controls whether supplements are transmitted if present or must be present.
Scans this barcode to enable or disable the EAN-13 barcode symbology.
Configures EAN-13 transmission of leading and check digits.
Enables or disables ISBN and ISSN formats for EAN-13 symbology.
Enables or disables the 5-digit supplement for EAN-13 barcode symbologies.
Enables or disables the 2-digit supplement for EAN-13 barcode symbologies.
Controls whether supplements are transmitted if present or must be present.
Provides a test barcode symbol for Code 39 symbology.
Provides a test barcode symbol for Code 93 symbology.
Provides a test barcode symbol for Interleaved 2 of 5 symbology.
Provides a test barcode symbol for Codabar symbology.
Provides a test barcode symbol for Code 128 symbology.
Provides a test barcode symbol for MSI/Plessey symbology.
Provides test barcode symbols for UPC-A and its supplements.
Provides test barcode symbols for UPC-E and its supplements.
Provides test barcode symbols for EAN/JAN-13 and its supplements.
Provides test barcode symbols for EAN/JAN-8 and its supplements.
Represents ASCII control characters (NUL, LF, CR, ESC, etc.) for configuration.
Represents ASCII special characters (!, @, #, $, %, &, etc.) and digits for configuration.
Represents ASCII uppercase letters (A through Z) for configuration.
Represents ASCII lowercase letters (a through z) for configuration.
Represents scanner programming for PC function keys F1 through F12.
Represents scanner programming for PC navigation (Cursor, Page Up/Down) and editing keys.
Represents scanner programming for common PC keys like Tab, Esc, Enter, and Del.
Details optical characteristics of the scanner, including width, depth of field, and scan rate.
Details electrical characteristics, including light source, voltage, and current consumption.
Details mechanical aspects like dimensions, weight, cable length, and housing material.
Details environmental operating conditions, storage, humidity, and certifications.
To Next Page
