Need help?Do you have a question about the Wasp WLR8950 and is the answer not in the manual?
General| Sensor type | CCD |
|---|---|
| Read rate (max) | 450 reads/s |
| Decoding standards | UPC-A/UPC-E EAN-8/EAN-13 Industrial 2 of 5 Codabar Matrix 2 of 5 Code 11 Code 93 Code 32 Code 128 Standard Code 39 Full ASCII Code 39 Interleaved 2 of 5 China Postal Code MSI Plessy Code UK Plessy Code EAN/UCC 128 Telepen Code IATA Code |
| Maximum scan width | 305 mm |
| Cable length | 152 m |
| Standard interfaces | PS/2 |
| Product color | Black, Yellow |
| Housing material | ABS synthetics |
| Compatible operating systems | Windows 2000/7/Vista/XP (SP3) Windows Server 2003/2008 |
Instructions for connecting the WLR8950 PS2 scanner to a PC.
Instructions for connecting the WLR8950 USB scanner to a PC.
Steps to configure minimum and maximum barcode lengths using scan codes.
Instructions to reset the scanner to its default settings using a barcode.
Settings for auto-sensing, PC connection type, and interface selection.
Options to configure scanner beep tones and data transmission timing.
Configuration for upper/lower case handling and keyboard language.
Adding prefix/suffix data and defining end-of-text messages.
Settings for scanning negative labels and identifying barcode symbologies.
Enabling or disabling specific barcode types for scanning.
Configuration options specific to the Code 39 barcode symbology.
Configuration options for Code 128 and UCC/EAN 128 symbologies.
Configuration options for UPC-A and its 2/5 digit supplements.
Configuration options for EAN-13 and its 2/5 digit supplements.
To Next Page
