Wasp WLR8950 - Chapter 3: Scanner Installation Guide; WLR8950 PS2 Scanner Installation; WLR8950 USB Scanner Installation

Chapter 3
3
Installation
Trigger
Scanning Aperture
Din-6M
Din-6F
Trigger
Scanning Aperture
USB Port
1. Plug the USB of the WLR8950 Scanner directly into your PC’s USB port.
1. Turn off your computer.
2. Unplug your PC keyboard cable and plug the male end (Din 6) of the WLR8950 Scanner directly into your PC keyboard port. Plug
your keyboard cable into the other end (female Din 6) of the the scanner.
3. Turn your computer on.
WLR8950 USB Scanner
WLR8950 PS2 Scanner