Need help?Do you have a question about the Wasp WWS650 and is the answer not in the manual?
General| Scanning Technology | Laser |
|---|---|
| Resolution | 4 mil |
| Interface | USB |
| Bluetooth Range | Up to 10 meters |
| Supported Barcodes | UPC/EAN, Code 39, Code 128, Interleaved 2 of 5, Codabar |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 5% to 95% (non-condensing) |
| Drop Specification | 1.5 meters |
| Power Supply | Rechargeable Li-ion battery |
| Compatibility | Windows, Android, iOS |
| Light Source | 650 nm Laser Diode |
Explains customization using interface and programming bar codes.
Critical warnings and guidelines for safe Li-ion battery handling.
Steps to connect the reader and establish host communication.
Selects the appropriate interface type for system connection.
Selects options to further customize reader after interface bar code scan.
Change default parameters to meet application needs.
Settings for RS-232/USB-Com and Keyboard interfaces.
Options for 1D and 2D symbologies.
Sets the data transmission rate per second.
Customizable code up to three ASCII characters to identify symbology type.
Configures various scan modes and reader behaviors.
Enables/disables support for various 1D bar code symbologies.
Configuration for Code 39 including check character and length control.
Configuration for Data Matrix including style and length control.
Configuration options specific to Bluetooth connectivity.
Enables/disables authentication and encryption for the BT link.
Specifies 4-character or 16-character PIN code length.
Defines rules for messages from Host to Base Station.
Defaults for EAN/UPC, Code 39, Code 128, GS1-128, Codabar.
To Next Page
