Wasp WWS650 - Standard 2 of 5; Standard 2 of 5 Enable;Disable; Standard 2 of 5 Check Character Calculation

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 133
STANDARD 2 OF 5
The following options apply to the Standard 2 of 5 symbology.
Standard 2 of 5 Enable/Disable
When disabled, the reader will not read Standard 2 of 5 bar codes.
DEFAULT
$CS2EN00(CR)
Standard 2 of 5 = Disable
$CS2EN01(CR)
Standard 2 of 5 = Enable
Standard 2 of 5 Check Character Calculation
This option enables/disables calculation and verification of an optional Standard 2 of 5 check
character.
DEFAULT
$CS2CC00(CR)
Standard 2 of 5 Check Character Calculation = Disable
$CS2CC01(CR)
Standard 2 of 5 Check Character Calculation = Enable