Wasp WWS650 - Scanning Features; Scan Mode

Reading Parameters Enter/Exit Programming Mode
Product Reference Guide 73
SCANNING FEATURES
Scan Mode
Selects the reader’s scan operating mode. See page 256 in “References” for descriptions.
$CSNRM00(CR)
Scan Mode = Trigger Single
DEFAULT
$CSNRM01(CR)
Scan Mode = Trigger Hold Multiple
$CSNRM02(CR)
Scan Mode = Trigger Pulse Multiple
$CSN-
Scan Mode = Flashing
$CSNRM04(CR)
Scan Mode = Always On
$CSN-
Scan Mode = Stand Mode
NOTE
Options concerning Stand Mode behavior are available at the following fea-
ture,
Stand Operation on page 75 .